What You Need to Know About AC Installation
It is essential to have it done properly when installing a brand new AC inside your home. This way, you'll make the most of the investment, and also keep your home comfortable.
Top-tier AC companies offer a wide range of solutions, ranging from assistance for clients and ensuring the quality of work. The right contractor can help you choose a system to suit your budget and needs.
Preparation
Before you can install a brand new system of air conditioning there are a couple of things that you will need to do. It will make installation simpler and provide you with more comfort in your home.
The most essential aspect of an AC installation is ensuring that the ductwork in your home is prepared to be installed. The ductwork will not be worked on by contractors if it's covered in dirt or debris. Also, ensure that you take it off and allow it to air out before installation begins.
A further important aspect of preparing is planning where the unit is going to be located. The contractor will need to be able to level the floor before constructing the pad needed to house your unit. This makes it simpler to set the unit on top of it without damaging your home.
If you want to ensure that your installation goes smoothly make sure that the team has everything they need. This can help save you cash and time for the future.
It is recommended to provide your contractor with an access ladder to ensure that they can reach the roof. Also, they will require access to the attic space, the basement and crawl space that the old HVAC unit was in.
Make sure you have a clear path that leads from the doorway to the room that you've picked for the installation. It is possible to do this by moving side tables and chairs out of the way, as in the form of vases or even slipper rugs.
Your technician needs to be able get to the place at which you will find the place where your A-coil (evaporator coil) is to be installed. The coil will usually be installed either under or above the furnace.
Evaporator coils play an essential component of every AC system. Your installer's lead must clear all obstructions and trees that are in the way before setting up a coil. This will save you cost in the future and prevent any problems in the future.
How to Layout the Pad
The arrangement of the pad is a crucial aspect of AC installation. It should be laid out in such a way that it will support your unit without causing it to shift or fall over. If it is tilted, it's not supported properly. It can result in harm to your coils, the fan motor, and the hoses. It also can create a vibration in your appliance in a way that could reduce its lifespan and possibly break things such as refrigerant lines.
You can choose from a variety of pad options according to your requirements as well as your budget. There are concrete pads that can be used for bigger outdoor units, along with composite pads that use recycled rubber or polymer. Both are sturdy and long-lasting, but the concrete pad might be best suited to heavy AC units.
The base of the pad should be first levelled. This is crucial if you're installing a composite pad which is positioned on top of the ground since it can shift over time.
The pad to air conditioning installers sink into the soil, which could affect efficiency of the AC as well as its SEER rating. There's a need to replace it with compacted gravel or pour concrete on top if it happens.
It's also important that you ensure that the pad doesn't interfere in your landscape. If plants or shrubs grow within the pad, they could wreak havoc on the unit as well as cause damages.
In the end, AC pads protect your AC unit from insects as well as soil erosion and vibrations. They can also help prevent common problems that could negatively affect the performance of your AC unit. Pads are a fantastic once-off purchase that saves you money over time. You can ask your HVAC supplier for advice in deciding if you should use a pad. They'll be able to recommend the appropriate material and assist in installing your pad properly. Furthermore, they'll be in a position to address all questions regarding the AC system or process of AC installation.
Get The Walls
Before the air conditioning contractor commences the installation before he can begin the installation, it's necessary to get the walls ready for the construction of the new unit. This is crucial as it allows the installer to be more efficient and have a more precise estimate of the project's timeframe.
First, locate the studs on your wall and mark them up with a pencil. It is possible to use a stud finder to help with this. If you don't own one get one from your local hardware shop. After you have located the studs you need to use an drywall saw to take them out them, and then expose the wall.
Remove all other objects that could hinder access into the room. These could be chair backs, tables as well as vases, rugs and much more. Also, it's recommended to eliminate any plants as well as trees or plants from the space to ensure your air conditioner can work efficiently and evenly.
You must drill a hole into your wall that allows cable and pipe to be able to access your unit. You should spray a sprinkling of expanding polyurethane foam into the hole immediately after drilling that way it will be sealed to stop hot air and insects from entering your space. When you've finished this is the time to set up the new air conditioning. You must follow the guidelines in the instruction manual prior to starting your installation.
Installation of the Unit
If you make use of the appropriate tools, and you have the correct approach, installing the window is quite easy. It's difficult to know what brackets and screws are best for your window. A bracket for people who aren't expert can be described as a component of a hardware with an opening which is connected to the window frame for the purpose of holding the upper sash in triple or double-hung windows. Make sure you read the manual attentively to make sure you know what you're doing prior to attempting to set it up yourself.